One of the terrifying sights in a driveway is power steering fluid stains. The fluids make your driveway look unattractive and feel unkempt when they are there. A driveway that looks unkempt is undesirable.

People try to find a solution for removing power steering fluid from the driveway to get rid of the stains. There are a variety of techniques to get rid of these fluids from your driveway, thankfully.

How to remove power steering fluid from concrete is the question this article seeks to address. It will also review every technique to get power steering fluid off the concrete. So, continue reading to get the answer to this question/

Does Power Steering Fluid Stain Concrete

Yes, as unfortunuate as it is, power steering fluid stains concrete. Power steering fluid is not the same as motor oil; similar to brake fluid, it is a hydraulic fluid that is thinner than oil but yet lubricates the moving parts of your car’s steering system. However, because it’s a petroleum product, the stains it leaves on your garage or driveway are the same.

How to Clean Power Steering Fluid off Concrete

Power steering fluid is rather similar to oil stains. But they are quite easier to remove when fresh. So in case your car has a leak the stain wont come off rightaway. You have to do a lot of scrubbing along the following tricks.

Use of Coke

The idea that highway patrol officers keep a can of Coke in their car to remove blood stains from the pavement is an urban legend.

You have nothing to lose by trying, but there’s no guarantee it will work on power steering fluid. Apply some stain to the area and cover with plastic to stop it from evaporating. After cleaning, you might observe an improvement when you take off the plastic. Try again if the discolouration is still apparent.

Use a Talcom or Baby Powder

You can clean your driveway of liquids by using talcum powder or baby powder. While you clean, the powder collects and absorbs the power steering fluid on your driveway without requiring your touch.

Using paper towels, an absorbent cloth, or a sponge, first absorb the extra liquids. After that, scatter the powder over the impacted area and allow it to absorb. After the powder has absorbed the liquid, brush the powder off to clean the fluid. If the fluid has not entirely disappeared, repeat the procedure. This is one of the effective methods to remove power steering fluid from concrete.

Use of Oven Cleaner

You may clean power steering fluids off concrete by using oven cleaning. All that needs to be done is use enough oven cleaner to completely cover the fluid stain, then let it sit for at least fifteen minutes.

Scrub the fluid stain with a harsh steel brush or a brush with strong bristles. You will notice the fluid stain beginning to fade as you scrub. Work on the area until the spot disappears. Use strong pressure water to rinse the area. If the fluid still appears, you can try the procedure again.

Ways To Remove Power Steering Fluid from Driveway

While removing fluid stains from concrete requires a lot of effort, not everydriveway is made of concrete. However the following methods can be tried to remove power steering fluid from driveway in any case.

Use Muriatic Acid

Muriatic acid is similar to the comic book character in that; if handled incorrectly, it may cause collateral damage. Always wear safety goggles and gloves when handling them to protect your hands and eyes.

One cup of acid should be dissolved in one gallon of water. By brushing the stain on rather than pouring it, you may avoid splatters and apply it using an old paintbrush. You can neutralize the acid by sprinkling lime on the stain and letting it sit for a few hours.

After that, you can brush the stain into a container for disposal.

Spread Kitty Litter on The Driveway

If cat litter is combined with an absorbent material like clay pellets, it can be used to mop up oil spills. Clay may draw liquids from a porous highway due to its high absorption capacity. If your driveway’s power steering fluid is new or light, let cat litter sit on it for a few minutes.

If the liquid covers a sizable area or if there is an abnormally moist area, let the cat litter sit for the night. After cleaning up the initial pile of trash, repeat the process if there is still moisture on your driveway. Dish soap can be employed in a variety of non-kitchen cleaning situations.

Use Baking Soda

You can use baking soda to get rid of any liquid residue that has built up in your driveway. Removing moisture from any surface is excellent with absorbents like this one. To get rid of liquids from a driveway, use baking soda.

The baking soda must be somewhat moist to adhere to the liquid. After 30 minutes of sitting in the combination, the fluid can be scraped off with a strong brush. With a garden hose, thoroughly rinse. Repeat the process as required until every trace of the oil has vanished.

If baking soda cannot get the power steering fluid out of your driveway, you will require more effective treatment. A pressure washer is essential for homeowners to remove power steering oil from the driveway. Move the spray circularly around the stain with your pressure washer on a low setting, then gradually turn it up.

Go for a Commercial Driveway Degreaser

You could clean the fluid on your driveway with anything made to remove dirt and oil from an engine. Consequently, you might need to use an industrial-strength driveway cleaner if you have power steering fluid that cannot be eliminated using the abovementioned procedures.

The task can be completed more quickly and simply with this degreaser. The driveway must be treated by using a degreaser. Like ball bearings, the degreaser makes the fluid easier to remove by liquifying it.

The only drawback is that degreasers can’t effectively clean a badly contaminated driveway since they don’t break down the fluid.

Use Poultice

Additionally, a driveway can be cleaned of liquids by applying a poultice. For use in poultices, cleaner and absorbent materials—such as sawdust or talc—are combined to create a thick paste. Both the cleaner and the absorbent will remove the liquid and remove the stain.

Before using it on the discoloration, the poultice must be soaked in water. Make sure you’ve thought of everything. In your driveway, the power steering fluid will be drawn out by absorbent material as the solvent degrades and breaks down the fluid.

When the poultice has dried, scrape it off with a pointed brush. Repeat the process if the fluid doesn’t get cleaned up. However, using this method to remove sizable fluid stains would take much time, and it might not be economical.

Apply a Paint Thinner

Solvents like paint thinners are employed to remove fluid stains. Using sawdust and paint thinner can work wonders to get power steering fluid out of your driveway. To make sawdust damp, combine it with paint thinner.

Over the harmed surface, spread the mixture. Check and clean sweep. Repeat the procedure if the stain is still visible on your driveway.

Bottom Line

It provides lubrication for the moving parts of the steering system yet is less viscous than normal motor oil; power steering fluid is different from brake fluid. It’s still a petroleum substance, so you should be concerned about your driveway or garage floor getting stained.

While it’s easier to remove power steering fluid stains when fresh, if your car leaks, you might not be able to get at the stain directly; otherwise, you’ll need to scrub. However, it’s always advisable to remove fluid stains as quickly as you can.

Your driveway will get increasingly saturated the longer the fluid is left on it, rapidly deteriorating. The mentioned techniques have an excellent reputation as over-the-counter or DIY solutions for getting power steering fluid out of your driveway.