No question stepping into a rocking camper is annoying. So how do you stabilize a camper? We’re going to fill you in and help keep your home on wheels sturdy when it’s stationary.

In this article, we cover how to keep your camper from rocking. You’ll also learn what kind of gear might be the best for the job. Let’s get started!

Why Is My Camper So Bouncy?

A little bounce in your camper when it’s not moving is normal, considering it has tires, and suspension and is not permanently connected to the ground. But excessive bouncing is typically due to the lack of stabilizing mechanisms. If your camper isn’t stable, it could feel like it’s rocking from side to side, shaking, or has a bounce-like feel when you walk around or when it’s windy.

Having some rocking or bounce in your camper is unlikely to harm it. However, many find the movement uncomfortable particularly when someone else moves around when you are still.

How Do I Stop My Camper From Shaking When Walking?

A shaky camper can get frustrating quickly. The key to stopping this is using leveling blocks, wheel chocks, stabilizer jacks, or a combination of all three. Keep reading as we dig into how to keep your camper from rocking with RV gear that can stabilize a camper.

Pro Tip: Having a wobbly camper isn’t the only mistake you can make when you’re starting out RVing. Check out these 17 Beginner Full-Time RV Mistakes You Can Avoid.

How Can I Make My Camper More Stable?

There are three main pieces of gear that can make your camper more stable. Let’s take a closer look at each.

Leveling Blocks and Chocks

An unlevel camper is likely to be more wobbly. Another way to keep your camper from rocking is by putting leveling blocks under your tires and wheel chocks at the front and back of your tires. This will help you level and stabilize your camper. When the tires have minimal room to move, it can reduce the amount of bounce in your camper.

You can also place the leveling blocks under your front tongue jack if its a travel trailer to decrease the jack extension. For fifth wheels they can be used under the landing gear. The less it’s extended, the less chance of movement you’ll have at the front of the camper.

Leveling blocks like the Camco Heavy-Duty 10 pack work well for dual or single axles. They interlock, so you can make them as long or high as you need them. You may need to go up higher on one side of your camper than the other to make it level.

In addition to leveling blocks, you can use wheel chocks to stiffen up the tires and prevent front-to-back movement. The X chock is a popular device the goes between the tires to help prevent movement.

Stabilizer Jacks

Stabilizer jacks reduce the side-to-side motion of a camper. Campers typically have four stabilizers in each corner under the rig. Some smaller campers may have two in the back. When using them, put down all of the stabilizer jacks to have equal distribution. And remember, they’re only for stabilizing and not a weight-bearing jack. Be careful not to put them down too far that they lift the camper frame, as you could damage the jacks and camper.

Stabilizer jacks often come standard on campers, especially newer models. But if yours doesn’t have them, you can purchase them online or at RV gear stores. For example, Libra True has a set of four stabilizer scissor jacks you can put on your camper. Sockets and mounting hardware come with the set.

For fifth-wheel trailers, a very popular stabilizer option is the kingpin tripod. These devices work by providing a wide tripod footprint underneath the kingpin to prevent movement. They can work with a standard kingpin or gooseneck connection and tend to work very well.

RV Step Stabilizer

RV steps can be unstable if there’s rocking. This can be dangerous, especially for people with mobility issues. You can do a couple of things to fix unstable camper steps. Camco has a step stabilizer that reduces rocking motion. It’s adjustable and mounts under the RV steps.

You can also switch out your camper steps with solid ones if you don’t have them. They are much more stable than fold-out steps. Lippert sells various sizes of solid entry steps. Just be sure to measure your camper before purchasing to get the right size. In addition, for those that need extra support getting in and out of the camper, you can add a solid step entry rail assist.

How Do You Stabilize a Single Axle Camper?

You can stabilize a single axle camper the same as a double axle. However, a single axle is likely to have more rocking and bouncing than a camper with two axles. Single axles are also typically shorter than a double, so you won’t need to have as much gear to stabilize it. Take some time to practice knowing where it needs the most support before your first camping trip.

Pro Tip: Are you leveling your RV the right way? We broke down how to do it like a pro!

Are Slide Out Stabilizers Necessary?

Slide-out stabilizers are not necessary, and they’re not recommended. Since slide-outs are made to balance with the camper, you could potentially damage the slide and camper by using a stabilizer. A slide-out stabilizer can force unexpected weight shifts. And they’ve been known to have additional effects, including changing your tire pressure when the weight is distributed unevenly for too long.

Instead of placing stabilizers on the slideouts place them on the RV frame.

Is Making Efforts to Stabilize Your Camper Worth It?

Making efforts to stabilize your camper is worth it for a comfortable stay in your home on wheels. Walking on eggshells because of a rocky camper gets old quickly. Implement the ideas recommended here for how to keep camper from rocking, and you’re likely to enjoy your camping experience much more.

Have you ever had to stabilize your camper? Tell us in the comments!

Read More From The Mortons:

• What Are RV Stabilizer Jacks?
• What Is An RV Steering Stabilizer?
• 6 Out of the Way National Parks That Are Worth the Extra Effort
• Do You Know How to Level an RV the Right Way?
• Horses & Hippotherapy

Sharing is caring!